Features:
Applications:
| Frequency Range | 6-18 GHz |
| Fundamental Rated Output Power at 1dB Compression @ 25°C | 35 dBm min, 35.5 dBm typ, 6-9 GHz 35 dBm min, 36.0 dBm typ, 9-14 GHz 32 dBm min, 34.0 dBm typ, 14-16 GHz 35 dBm min, 35.3 dBm typ, 16-18 GHz |
| Variation in Rated Output Power at P1dB Compression vs Temperature | +0.5 dB typical @ -54°C -0.2 dB typical @ 50°C |
| Saturated Output Power | 0.5 dB above P1 dB |
| Input Power Window for Saturated Output Power | -2.0 - +4.0 dBm typ, +25°C |
| Amplitude Matching to Reference | ±0.3 dB typical, ±1.75 dB max |
| Phase Matching to Reference | ±7 degrees typ, ±20 degrees max |
| Small Signal Gain | 34.0 dB average, 25°C 38.0 dB average, -54°C 33.5 dB average, +50°C |
| Harmonic Output Level @ P1dB | Typically better than –15 dBc |
| Output Two-Tone Third Order | Typically +39 dBm |
| L/R Switch Performance | Non-reflective ports |
| L/R Switching Speed | 80 nS typical |
| L/R Switch Video Leakage | <-50 dBm |
| L/R Switch Isolation | Typically better than 10 dB |
| Modulation: | |
| PRF Switching Time |
500 kHz max. 60 ns ON & OFF typical |
| In/Out VSWR | 2:1 |
| Load VSWR * † | 2:1 for 85% of band, 3:1 max |
| Power Supply ‡ | 3 A typ off +8.25 V rail at P1 dB 20 mA typ off -12 V @ P1 dB |
| Notes: * At 3:1 VSWR, the output power will reduce by 1.2dB due to mismatch loss † Unit must be operated with 50 ohm load at output ‡ No internal rail regulation. Recommended rail regulation is ±2.5% |
|
