The DF 360-1 provides the necessary radio frequency (RF) and control hardware to perform calibration and built-in-tests (BIT). The design allows for mounting an optional GPS antenna on the top of the subassembly.
A radome can be provided based on specific application requirements.
| Frequency range | 2.0 - 6.0 GHz (mid band) 6.0 - 18.0 GHz (high band) |
| VSWR | 2.0:1 |
| Antenna gain | -1 dB at center of band |
| Impedance | 50 ohms |
| Polarization | Slant 45, vertical, horizontal, CP |
| Azimuth beamwidth | 360° |
| AOA accuracy | 1° calibrated, 2.5° slope corrected |
| Electronic gain | 22 dB (2 – 6 GHz), 31 dB (6 – 18 GHz) |
| Electronic noise figure | 4.0 dB (2 –6 GHz), 5.0 dB (6 – 18 GHz) |
| Power handling | 23.6 watts (RF front end), 30.0 watts (bit/cal) |
| Connector | RF: SMA female, control/power |
| Command signal | RS 422 |
| Dimension | 12.59” diameter x 17.75” high |
| Weight | 40 lbs typical |
| Operating temperature | -40° C to +55° C |
| Shock | 160 g |
