150kV Cine Radiographic System

Overview

The system is designed to provide up to six sequential images, with each image being timed by the user to be 3 to 1000 microseconds apart. With the power of the PixelRay™ Command Control and Analysis Software, the user can capture, calibrate and precisely measure the image information. The system is modular and can be used with single frame cameras, multi frame cameras or CR Imaging.

Choose tab:

X-ray generators	6 each - 150 kV Pulsers (Model 43731)
X-ray head	6-channel Cine demountable pumped X-ray head
Spot size	0.5 mm, 1 mm or 3 mm (nominal)
X-ray source diameter	~1.5 in
Dose	2.5 mR per pulse at 1 m
Inter-pulse time	3 to 1000 ms
Exposure time (pulse width)	70 x 10-9 sec
Source cart assembly size	37 in W x 60 in D x 65 in H
System control rack size	24 in W x 32 in D x 8 in H
High-voltage power supply (#130-314700)
XCON (6 each all-in-one X-ray controller #43120B)	Delay trigger generator, trigger amplifier, pulsed event timer
Vacuum pump and controller
Electrical power (including cameras)	120 V, 20 A
All system interconnecting and control cables included

6 each 150 kV pulsers (Model 43731)
X-ray control console (remote control optional)
6-channel demountable pumped X-ray head
X-ray source service cart
Vacuum pump > Pump controller
All connecting cables
6 each CCD cameras (option 1) or 3 each intensified cameras (option 2)
6 each 55 mm 1.2 lenses
Mirror adjustment assembly
Fiber-optic communication bundle
Shielded camera housing mounted on adjustable service cart
Integrated communication
System camera control software

	Camera option 1	Camera Option 2
Frame rate	1 ms	< 100 ns
Spatial resolution	1376 x 1040 px	1360 x 1024 px at 12 bits
Quantum efficiency	1376 x 1040 px	38% @390 nm (HSS1), 62% @ 500 nm (GOS:Pr)
Low readout noise	2.4 counts/px	6/px = 1.2 counts/px
Pixel binning	2x2, 4x4, 8x8	2x2, 4x4, 8x8

Camera Communication and Control (Software Included)

	Camera option 1	Camera option 2
High-resolution CCD	6 each	3 each
55 mm 1.2 Camera lenses	6 each	3 each
Fiber-optic communication bundle	6 each	3 each

Digital Image Size

Screen size	Scan speed	File size
14 in by 17 in	100 µm	30 MB
14 in by 17 in	50 µm	120 MB
14 in by 51 in	50 µm	360 MB

Dose per Pulse Filtration

FILTERED X-RAY DOSE DATA	AL AND CU STEP WEDGE DATA

X-ray dose per pulse depends upon filtration. Typically 0.5” HDPE for blast shield. Cine system gives higher dose for low filtration due to window differences: Cine 0.032” Al vs. standard FXR 0.003” Slope of step wedge data shows both sources have similar penetration and endpoint HSS1 99% of integrated light output within 4 ms < 0.1% ghost after 5 ms GOS:Pr High-Pr (2%) is marginal for 5-ms frames, good for >10-ms framing 90% of integrated light output within 5 ms, 99% within 10 ms Low-Pr (0.07).

Resources

150kV Cine Radiographic System Data Sheet

X-Ray Systems Capabilities

Flash X-Ray Systems

L3Harris has produced and sold flash X-ray systems for more than 50 years and has a world-wide reputation for quality, reliability, durability and customer technical service. Most systems produced since the 1960s are still in operation today.