Sorry, you need to enable JavaScript to visit this website.
Skip to main content

T7™ Multi-Mission Robotic System

Modern Robotic User Interface Providing Unmatched Command and Control

T7’s highly intuitive interface redefines ease of use with immersive force feedback, providing unmatched command and control. Its precision control and human-like dexterity shorten task completion time and improve mission effectiveness.

The T7 robot system has the strength and dexterity to tackle any challenge. Its rugged, automotive-grade track system provides outstanding mobility and maneuverability. A variety of attachments enable use of standard-issue sensors, disruptors, and tools, supporting a wide range of commercial and military missions, including HAZMAT and vehicle-borne improvised explosive device (VBIED) defeat. In the configuration shown, T7 includes a pan, tilt, and zoom (PTZ) camera mast, high power multiple-input and multiple-output (MIMO) radios.

L3Harris T7 Robot Controller

Revolutionizing Robot Control

L3Harris’ cutting-edge intuitive motion control and haptic feedback make operating T7 as natural as moving one’s hand.

T7 Robot Specifications

Weight 710 lbs (322 kg) (with arm and batteries installed)
Dimensions (L x W x H) 47.3 x 27.6 x 45.7 in (120.1 x 70.1 x 116.1 cm)
Power 8+ hour runtime (depending on task)
12 BB-2590 batteries
Speed 5+ mph (8+ kph)
Mobility Skid steer track system
Climbs stairs and slopes over 45°
Traverses lateral slopes over 30°
Cameras 2 driving cameras (front, rear)
PTZ mast camera with 120x zoom
Zoomable gripper camera and mid-arm camera
4 fender-mounted corner cameras
Radio LOS range: 3300+ ft (1000+ m)
NLOS Range: 1000+ ft (300+ m)
Environmental -4°F to +140°F (-20°C to +60°C) operational
EMI-shielded for use with active jammers
Maximum fording depth: 10 in (25.4 cm)
IP56 sealed
Reach 87 in (2.2 m) horizontal; 122 in (3.099 m) vertical
Lift Capacity 250+ lbs (113+ kg) near chassis; 60+ lbs (27+ kg) at full extension
Gripper Force-sensing gripper with non-conductive wire cutter
Disruptors Supports up to 4 total disruptors, including up to 2 large disruptors (PAN, PIGSTICK, HOTROD, RE70, etc.)
Haptic Controller
Weight 35 lbs (16 kg) (including battery)
Dimensions (L x W x H) 18.7 x 16.2 x 9.2 in (47.5 x 41.0 x 23.4 cm)
Power 4+ hour runtime
1 BB-2590 or external 24-30 VDC power
Controllability Manipulator presets (standard and user-defined)
Manipulator motion rewind function
Audio/video Daylight-visible display

Latest articles

L3Harris T7 Robotic System

Editorial | 08. 15. 2022

How our robotic systems help to maximise mission success

The ultimate goal of any mission is that it is successful. The degree of this success can vary widely depending on the tools available for the job, so it’s vital that the equipment, technologies or capabilities being harnessed are purpose-built to maximise the likelihood of a successful outcome.

L3Harris T7 Robotic System

Editorial | 08. 15. 2022

How our robotic systems help to maximise mission success

T7 Robots Ready for Their Next EOD, HAZMAT or CBRNE Mission

Editorial | 04. 08. 2022

How to Unlock the Most Value from Your Robotic Systems Investment

T7 and T4 EOD Robots

Editorial | 02. 02. 2022

How Harnessing the Right Size of Robot Can Make a Big Difference to Your Mission

L3Harris is awarded a 10-year, $85-million, IDIQ contract.

Press release | 09. 14. 2021

L3Harris Robots to Help Protect US Air Force Bases Around the World

L3Harris has completed its contract with the UK Ministry of Defence (MOD) to replace their existing aging fleet of remote-controlled vehicles.

Trade Release | 06. 28. 2021

L3Harris Technologies Delivers Final Explosive Ordnance Disposal Robot to UK Ministry of Defence for Project STARTER

Contact the Robotics Team


Related Domains & Industries

Solutions that solve our customers' toughest challenges.
view all capabilities